Stellar Industrial | Royal 43340 Grippex 20S Round Shank Bar Puller, For Use With Royal Grippex 20S Coolant-Actuated CNC Lathe, 1 in Shank

content loaded

puller bar 1 in shk rnd shk

Stellar Part #ROYAL 43340

MFG Part #43340

MFG Name:Royal Products

Royal Bar Puller, Round Shank, Series: Grippex 20S, For Use With: Royal Grippex 20S Coolant-Actuated CNC Lathe, 1 in Shank

The patented grippex 20L CNC bar puller is actuated by a CNC lathe's coolant system, as coolant is fed through the unit, it pushes a piston forward which causes the fingers to close down on the bar stock, when the coolant is turned off, the fingers automatically spring open
With this bar puller, no adjustment by the operator is necessary - the fingers simply close down until they contact the bar, this feature is especially useful for making multiple pulls on the same work piece, even after the OD has been turned
The grippex coolant actuated bar puller is also useful as a part loader/unloader, when fitted with special jaws, this tool can remove finished parts from a machine's sub spindle and place them into the parts catcher, this eliminates the need for unreliable ejectors and enables the sub spindle to swallow longer parts
Smaller body diameter enables 20S units to be used on machines with less tool clearance and smaller turrets
The royal grippex bar puller achieves very high gripping force through a patented finger mechanism that pivots on roller bearings, as little as 15 psi of coolant pressure is enough to enable the grippex to pull a 210 lb bar
Gripping force for 20S is quite high, but not as high as the 20L models
140 psi maximum coolant pressure

The patented grippex 20L CNC bar puller is actuated by a CNC lathe's coolant system, as coolant is fed through the unit, it pushes a piston forward which causes the fingers to close down on the bar stock, when the coolant is turned off, the fingers automatically spring open
With this bar puller, no adjustment by the operator is necessary - the fingers simply close down until they contact the bar, this feature is especially useful for making multiple pulls on the same work piece, even after the OD has been turned
The grippex coolant actuated bar puller is also useful as a part loader/unloader, when fitted with special jaws, this tool can remove finished parts from a machine's sub spindle and place them into the parts catcher, this eliminates the need for unreliable ejectors and enables the sub spindle to swallow longer parts
Smaller body diameter enables 20S units to be used on machines with less tool clearance and smaller turrets
The royal grippex bar puller achieves very high gripping force through a patented finger mechanism that pivots on roller bearings, as little as 15 psi of coolant pressure is enough to enable the grippex to pull a 210 lb bar
Gripping force for 20S is quite high, but not as high as the 20L models
140 psi maximum coolant pressure

Series:

Grippex 20S

Specifications:

1 in Shank

Suitable For Use With:

Royal Grippex 20S Coolant-Actuated CNC Lathe

Type:

Round Shank