content loaded
Simpson Strong-Tie
ADHESIVE EPOXY SIDE-BY-SIDE CRTG 22OZ
adhesive epoxy side-by-side crtg 22oz
Stellar Part #SIMPS SET22
MFG Part #SET22
MFG Name:Simpson Strong-Tie
Product Description:
Simpson Strong-Tie Strong-Rod SET22 SET High Strength Epoxy Adhesive, 22 oz Side-By-Side Cartridge, Liquid/Paste Form, Black/White, 1.21/1.23 at 72 deg F
Login For Price
- Item Features
- Technical Specifications
- Resources
- Code listed under the IBC/IRC for URM per ICC-ES ESR-1772
- For best results store between 45 to 90 deg F
- Surfaces to receive epoxy must be clean
- Base material temperature must be 40 deg F or above at the time of installation for best results, material should be 70 to 80 deg F at time of application
- To warm cold material, store cartridges in a warm, uniformly heated area or storage container
- Do not immerse cartridges in water to facilitate warming
- Mixed material in nozzle can harden in 30 min at temperatures of 70 deg F and above
- The load tables list values based upon results from the most recent testing and may not reflect those in current code reports
- Non-sag or thixotropic paste consistency
- 136 deg F heat deflection temperature
- 3218 psi at 2 days and 3366 psi at 14 days bond strength
- Easy hole cleaning procedure no power-brushing required
- 0.11% at 24 hr water absorption
- Suitable for use in damp or wet anchor sites
- When properly mixed, adhesive will be a uniform gray color
- Threaded rod anchoring and rebar doweling into concrete, masonry and URM red brick
- Pick-proof sealant around doors, windows and fixtures
- Paste over for crack injection preparation
- Bonding hardened concrete to hardened concrete
- CalTrans and multiple dot listings
- Code listed under the IBC/IRC for URM per ICC-ES ESR-1772
- For best results store between 45 to 90 deg F
- Surfaces to receive epoxy must be clean
- Base material temperature must be 40 deg F or above at the time of installation for best results, material should be 70 to 80 deg F at time of application
- To warm cold material, store cartridges in a warm, uniformly heated area or storage container
- Do not immerse cartridges in water to facilitate warming
- Mixed material in nozzle can harden in 30 min at temperatures of 70 deg F and above
- The load tables list values based upon results from the most recent testing and may not reflect those in current code reports
- Non-sag or thixotropic paste consistency
- 136 deg F heat deflection temperature
- 3218 psi at 2 days and 3366 psi at 14 days bond strength
- Easy hole cleaning procedure no power-brushing required
- 0.11% at 24 hr water absorption
- Suitable for use in damp or wet anchor sites
- When properly mixed, adhesive will be a uniform gray color
- Threaded rod anchoring and rebar doweling into concrete, masonry and URM red brick
- Pick-proof sealant around doors, windows and fixtures
- Paste over for crack injection preparation
- Bonding hardened concrete to hardened concrete
- CalTrans and multiple dot listings
- Applicable Materials:Solid Brick, Grouted Concrete Block, Unreinforced (URM) Brick, Concrete, Hollow (Ungrouted) Concrete Block, Hollow Brick and MasonryBase Type:EpoxyColor:Black/WhiteContainer Size:22 ozContainer Type:Side-By-Side CartridgeCuring Time:24 hr at 65 deg F, 72 hr at 40 deg FFlash Point:250/198 deg FForm:Liquid/PasteOdor/Scent:Ammonia/SweetpH Range:6.9/10.6Series:SET, SET®Specific Gravity:1.21/1.23 at 72 deg FType:High StrengthVOC Content:6 g/L