content loaded
Simpson Strong-Tie® Strong-Rod™ AT30 Acrylic Adhesive, 30 oz Side-By-Side Cartridge, Liquid/Paste Form, Black/White, 1.38
adhesive acryl side-by-side crtg 30oz
Stellar Part #SIMPS AT30
MFG Part #AT30
MFG Name:Simpson Strong-Tie
Product Description:
Simpson Strong-Tie® Strong-Rod™ Acrylic Adhesive, Series: AT Series, Side-By-Side Cartridge Container, 30 oz Container, Acrylic Glass Base, Composition: Resin White Side)CrystalLine Silica, Quartz, Methyl Methacrylate Monomer, 2-Propenoic Acid, 2-Methyl-1,6-Hexanediyl Ester, Tripropyleide Glycol Diacrylate, (Initiator Black Side)- CrystalLine Silica, Quartz, Dibenzoyl Peroxide, Diisobutyl Phthalate, Liquid/Paste Form, 24 hr at 0 deg F, 1 hr at 60 deg F Curing, Black/White, Strong Acrid Odor/Scent, 1.38 Specific Gravity, >73/203 deg F Flash Point, 5.9/5.3 pH, 25 g/L VOC, Applicable Materials: Grouted/Hollow Grouted Concrete Block, Concrete, Masonry and Unreinforced (URM) Brick
Login For Price
- Item Features
- Technical Specifications
- Resources
- Non-sag gel formulation ideal for horizontal, vertical and overhead applications
- Mixed material in nozzle can harden in 5 to 7 min at temperatures of 70 deg F and above
- When the concrete temperature is at or below freezing, ensure any holes drilled in advance are free of frost or ice
- Use only Simpson Strong-Tie® mixing nozzles in accordance with Simpson Strong-Tie® instructions
- Modification or improper use of mixing nozzle may impair AT adhesive performance
- 91 shore D hardness
- Non-sag or thixotropic paste consistency
- 142 deg F heat deflection
- 2960 psi at 2 days and 3567 psi at 14 days bond strength
- 0.25% at 24 hrs water absorption
- 10930 psi at 7 days compressive yield strength
- Easy hole cleaning procedure no power-brushing required
- 502330 psi at compressive modulus
- When properly mixed, adhesive will be a uniform gray color
- Threaded rod anchoring and rebar doweling into concrete, masonry and URM (red brick)
- Multiple dot listings
- For best results store between 32 to 80 deg F
- Surfaces to receive adhesive must be clean
- Base material temperature must be 0 deg F or above at the time of installation
- Information on installations below 0 deg F
- Non-sag gel formulation ideal for horizontal, vertical and overhead applications
- Mixed material in nozzle can harden in 5 to 7 min at temperatures of 70 deg F and above
- When the concrete temperature is at or below freezing, ensure any holes drilled in advance are free of frost or ice
- Use only Simpson Strong-Tie® mixing nozzles in accordance with Simpson Strong-Tie® instructions
- Modification or improper use of mixing nozzle may impair AT adhesive performance
- 91 shore D hardness
- Non-sag or thixotropic paste consistency
- 142 deg F heat deflection
- 2960 psi at 2 days and 3567 psi at 14 days bond strength
- 0.25% at 24 hrs water absorption
- 10930 psi at 7 days compressive yield strength
- Easy hole cleaning procedure no power-brushing required
- 502330 psi at compressive modulus
- When properly mixed, adhesive will be a uniform gray color
- Threaded rod anchoring and rebar doweling into concrete, masonry and URM (red brick)
- Multiple dot listings
- For best results store between 32 to 80 deg F
- Surfaces to receive adhesive must be clean
- Base material temperature must be 0 deg F or above at the time of installation
- Information on installations below 0 deg F
- Applicable Materials:Grouted/Hollow Grouted Concrete Block, Concrete, Masonry and Unreinforced (URM) BrickBase Type:Acrylic GlassColor:Black/WhiteComposition:Resin White Side)CrystalLine Silica, Quartz, Methyl Methacrylate Monomer, 2-Propenoic Acid, 2-Methyl-1,6-Hexanediyl Ester, Tripropyleide Glycol Diacrylate, (Initiator Black Side)- CrystalLine Silica, Quartz, Dibenzoyl Peroxide, Diisobutyl PhthalateContainer Size:30 ozContainer Type:Side-By-Side CartridgeCuring Time:24 hr at 0 deg F, 1 hr at 60 deg FFlash Point:73/203 deg F, >73/203 deg FForm:Liquid/PasteOdor/Scent:Strong AcridpH Range:5.9/5.3Series:AT SeriesSpecific Gravity:1.38VOC Content:25 g/L