content loaded
Stellar Part #MASCH WHAMEX-270 UNDYED
MFG Part #WHAMEX-270G
MFG Name:Master Fluid Solutions
Product Description:
Master STAGES WHAMEX-270G Whamex Machine Tool Sump/System Cleaner, 270 gal Tote Bag, Mild Odor/Scent, Yellow, Liquid Form
Login For Price
- Item Features
- Technical Specifications
- Resources
- A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
- Spray down the machine with a 10%-15% Whamex™ and water solution using The Whammer™ or a general-purpose garden sprayer. Scrub out the chips, sludge, and any other residues from all interior, exterior, tool changer areas including high-pressure sumps and filter canisters
- 10.6 at 2% Working Solution, 10.5 at 5% Working Solution pH range
- 215 deg F flash point
- 120 deg F temperature
- 12 Months shelf life
- Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
- Very hard water tolerant allowing it to be effective in raw water or used coolant
- Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
- When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
- Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
- Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
- PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex™ into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES™ DF1 or TRIM® TC 239, available during this process
- After the Whamex™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
- A very specialized formula that draws on Master Chemical's knowledge of coolant formulation and many years of hands-on experience in machine cleanouts
- Spray down the machine with a 10%-15% Whamex™ and water solution using The Whammer™ or a general-purpose garden sprayer. Scrub out the chips, sludge, and any other residues from all interior, exterior, tool changer areas including high-pressure sumps and filter canisters
- 10.6 at 2% Working Solution, 10.5 at 5% Working Solution pH range
- 215 deg F flash point
- 120 deg F temperature
- 12 Months shelf life
- Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas - getting rid of these residues is one of the best ways to extend coolant life in your system
- Very hard water tolerant allowing it to be effective in raw water or used coolant
- Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
- When used as directed below, this product is compatible with TRIM® brand synthetic, semisynthetic, and soluble oil coolants, as well as most competitive coolants
- Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it wont leave a slippery residue
- Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways
- PREFERRED METHOD FOR CLEANING MACHINE TOOLS AND CENTRAL SYSTEMS: Add 1%-3% Whamex™ into the machine sump and run machine as normal for at least 24 hours or more for best results, if the machine runs high pressure through-the-tool for significant amounts of time, the cleaner may cause some foam, keep a defoamer, such as Master STAGES™ DF1 or TRIM® TC 239, available during this process
- After the Whamex™ has circulated for at least 24 hours, pump out the sump and remove all chips, sludge, residue and swarf. Remember to clean out overflow areas and flumes
- Color:YellowContainer Size:270 galContainer Type:Tote BagForm:LiquidOdor/Scent:MildSeries:Whamex, Whamex™Specific Gravity:1.026 to 1.134